INGLET vertical saws and cutters · Products · Pneumatic Underpinner MINIMAX

Site map

You are here: Home / Products / Underpinners / Pneumatic Underpinner MINIMAX

Products

Underpinners

Pneumatic Underpinner MINIMAX

Ask now

Models

Code 72 01 08

PNEUMATIC UNDERPINNER -MINIMAX-

The new pneumatic underpinner MINIMAX is designed for a better operation during the moulding joining, due to its wide space at the support place.
It is also remarkable for its new system of double push-button joined in the same zone to facilitate the visibility in the work area and the handling of the operation previous to the adjustements.
The new MINIMAX is equipped with a press of adjuster height and with piston of double rod that offers an efficient resistance even working in situations of high capacity.
The nails insertion is done through a cylinder which dimensions and capability achieve a high speed of work and great efficiency at the nail insertion process, besides, the power can be regulated with accuracy to avoid the damage of most delicate mouldings or to work with the harder ones.
The nail fastening, as it is usual in INGLET is done through a magazine, securing the commodity of the work and improving the nail guided into the magazine.
With a system of moulding square adjustable at 45º it achieves the best angle adjust with complicated mouldings.
The position stops are in millimetre to insert the nails with great accuracy.
The system of pneumatic feed is realized with a cock to assure the blow off of accumulated water into the interior dryer filter.

Technical information

Operation	Pneumatic manual
Press arm	Orientable, vertical guided
V-Nails pusher	Pneumatic
Advance	Milimetric
Cylinder	Simple with double rod
Work pressure	4-6 bar
Work angles	45º, 30º(1), 22,5º(1), 15º(1) y 10º(1)
Max. profile	110 mm
High profile max.	90 mm
High profile min	8 mm
V-Nails sizes	7, 8 10, 12 y 15
Weight	52 Kg
Height	1.160 mm
Width	660 mm
Depth	480 mm

Glued V-Nails

Code 07 13 07

V-Nails UNI 7 mm -8.000 u-

Code 07 13 10

V-Nails UNI 10 mm -8.000 u-

Code 07 13 12

V-Nails UNI 12 mm -8.000 u-

Code 07 13 15

V-Nails UNI 15 mm -8.000 u-

Code 07 14 07

V-Nails UNI HARD 7 mm -8.000 u-

Code 07 14 10

V-Nails UNI HARD 10 mm -8.000 u-

Code 07 14 12

V-Nails UNI HARD 12 mm -8.000 u-

Code 07 14 15

V-Nails UNI HARD 15 mm -8.000 u-

Accessories

Code 03 03 18

Accesory for 6 sides frame 30º

Code 03 03 17

Accesory for 8 sides frame 22,5º

Code 03 03 19

Accesory for 12 sides frame 15º

Code 03 03 20

Accesory for 18 sides frame 10º

Spare

Code 03 04 02

Cartridge 7 mm

Code 03 04 03

Cartridge 8 mm

Code 03 04 04

Cartridge 10 mm

Code 03 04 06

Cartridge 12 mm

Code 03 04 08

Cartridge 15 mm

Code 03 04 58

Hammer

INGLET, S.L.U. · Avenida Cervera, 21 · 25300 Tàrrega (Lleida) Spain
Tel. +34 973 312 312 · Fax +34 973 310 755 · E-mail: export@inglet.com · Nota legal